Piers & Beams Palmdale, CA
What Are Foundation Piers?
Foundation piers, Palmdale, CA are structures built in front of a home to support it. This is usually a row of bumps or ridges on the land's surface, that will be used to hold up the foundations of a building. There are four main types of foundation piers - helical piers, post-piers, cast-in piers, and cast-out piers.
A helical pier is one that is
constructed like a helical cable. The top of the structure is called the outrigger while the bottom is known as the trigger. When the piers are being set up, they need to be supported by several posts on the ground. These are known as pilings. The foundation piers are then placed directly under the pilings. Helical piers are installed in many cases, while post-piers and cast-in piers are installed in fewer cases.
Contact Us
What are the Most Common Problems you can Encounter?
Many times foundation repair works will need to be done around concrete piers. There may be large cracks in these structures because of the weight that can be placed on them by an overweight building. You should try to repair the cracks before you place another foundation repair structure on top of it. Sometimes you can get away with placing the new structure on the pilings but the repair cannot occur until the old one is torn down. This is another reason why you should try repairing the cracks before you put another one on.
Another common problem with concrete foundation piers is when they become weak over time. They can eventually crack under stress and cause water damage. The solution to this problem is to repair them or replace them. Most of the time you can replace the pilings or the entire pier; however, you may have to remove part of the floor for repair.
What are the different kinds of Foundation Piers?
Concrete foundation piers are commonly used in areas where groundwater is a concern. It is the foundation that holds up the floors in your home, basement, and parking lot. If you have cracks in these areas, they are more likely to cause water damage in these areas. In fact, it has been said that improperly placed concrete pilings can cause foundation walls to collapse.
Most people think of helical piers when they think of foundation repair or foundation piers. These are the ones that are usually installed at the corners of a building. These are generally made out of wood or polystyrene materials. These piers are commonly used in areas where the soil is loose and does not have a lot of pressure to keep it in place. They are used to support the walls of the building.
Push piers are generally used when soil pressure is not an issue, but columns are still needed. These are the types of foundation piers that are commonly used when there is a need for support. When a column is supported by a series of push piers, there is less strain put on one column than there would be if the columns were not supported at all. This is especially helpful when it comes to walls. If the wall were not supported at all, then the entire building could crumble.
If you are looking for someone to help you with foundation repair, then you will want to make sure that you get a quality
foundation repair service. You will want someone that knows how to handle the different types of piers that may be required to fix your foundation problems. Many buildings have foundations that are old and have been neglected. Now is the time to hire a foundation expert to come out and take a look. After seeing the damage that may be present, you will be able to make the right decision about what type of foundation repair needs to be done.